SCB6 Series Hall Current Sensor is a new generation closed loop current sensor based on Hall effect principle, it can accurately measure DC, AC and pulse current and other various irregular waveforms current in electrical isolation conditions. Perforations in the form of a square type, use for copper connections, it is widely used ininverters, power supply, DC panel and welding machines. High-performance core result minimal residual magnetism, all electronic is imported components assembled, along with excellent circuit design, it has excellent characteristics with long-term stable operation even in harsh working conditions.
| Socan SCY6 technical parameters |
|
Open Loop Current Sensor |
| Parameters(25°C) Model |
SCY6- |
| 100A |
200A |
300A |
500A |
| Nominal Rms Current (Ipn) |
±100AT |
±200AT |
±300AT |
±500AT |
| Measuring Range (Ip) |
300AT |
600AT |
750AT |
1000AT |
| Load resistance Rmax |
≥10kΩ |
| Supply Voltage |
±4V or ±5V |
| Working voltage |
DC ±12V~±15V(±5%) |
| Accuracy @ Ta=25°C |
±1% FS |
| Linearity @ Ta=25°C |
±1% FS |
| Withstand voltage |
2.5kVrms/50Hz/min |
| Offset Voltage |
< ±30mV |
<±15mV |
| Offset temperature characteristics |
< ±0.1%/°C |
<±0.05% |
| Themal drift of Vo |
< ±2mV/°C |
< ±1mV/°C |
| Hysteresis offset |
<30mV |
< 20mV (if=F.S. 0<--- --->Norminal RMS Current) |
| Reponse time |
< 5uS |
| Current consumption |
<±15mA |
| Operating temperature |
-20~+80 °C |
|
Storage temperature
|
|
|
|
|
| 1. SCY6 Series 's up and down can open and close without removing the busbar line, easy to install. |
| 2. Based on open-loop principle,it can measure DC, AC and Pulse current. |
|
| 3. Square perforation, mainly measure wire conductor current. |
|
| 4. Features: High accuracy, low power consumption, high libablity and stronge overload capacity. |
| |
|
|
|
| Caution: Incorrect wiring may damage the sensor |
|
|
|
-40~+85 °C
|
